321-345-BOAT (2628)

810 Scallop Drive Cape Canaveral FL United States 32920


2017 Crevalle 26 Bay

2017 Crevalle 26 center console for sale located in Melbourne Beach, Florida combines performance and comfort into a top-notch fishing boat. This high-end fishing machine is powered by one of the most reliable engines in the industry, the Yamaha 300 four-stroke outboard (22 low hours). This 26' Crevalle bay boat is loaded with extras including a full Garmin electronics package, Yamaha command center with fly by wire controls, fusion head unit, Seastar hydraulic jack plate, on board chargers, dual Blade power poles, 36V Minn Kota Riptide, a top of the line tandem axle aluminum trailer with upgraded rims and tires, and much more. This boat has been garage kept and still has the new boat smell.


Designed by anglers with families to be the most family friendly 26 on the market.


Get lobsters in the Keys….Scallops in the Gulf….or Grouper on the rock piles- no other boat meets eye to eye with the 26 bay by Crevalle Boats.


All reasonable offers considered. Showings are by appointment only.

  • Detailed Specifications


    Warranty: 10 years
    Hull Shape: Modified Vee



    LOA: 25 ft 6 in
    Beam: 8 ft 6 in
    Maximum Draft: 1 ft 0 in
    Deadrise: 16 ° at Transom
    Dry Weight: 3600 lbs



    Engine 1:
    Engine Brand: Yamaha
    Year Built: 2017
    Engine Model: F300
    Engine Type: Outboard
    Engine/Fuel Type: Gas/Petrol
    Location: Center
    Engine Hours: 22
    Propeller: 3 blade propeller
    Drive Type: Stern drive
    Engine Power: 300 HP



    Fuel Tanks: (83 Gallons)



    GPS - Garmin
    Depthsounder - Garmin 7212

    Additional Equipment

    Road trailer

    Manufacturer Provided Description

    The 26 Bay includes integrated trim tabs, a larger console, 83 gallons of fuel, and up to 300 horsepower capacity. We still include 2 removable 72 quart coolers and offer an in-console porta pottie, forward seating package and removable ski pylon. And as always, all Crevalle Boats feature our trademark Storm Grey helm face with integrated foot rests and room for a 12” chartplotter. For the serious fisherman, the 26 Bay has (2) 28 gal release wells, 1 baitwell/cooler, lockable rod storage for 10 rods, standard powdercoated leaning post with backrest, rod holders, and rigging tray, and in-floor storage for a 5 gallon bucket with cast net.

    Hull and Deck
    • No wood construction
    • Coal tar epoxy coated fuel tanks
    • Single Piece Fiberglass Stringer System with foam flotation
    • 10 Year Transferable Hull Warranty
    • Black rub rail with Stainless Steel Insert
    • Composite Transom
    • Dedicated Anchor Locker
    • Position Control Hinges on all Hatches
    • Fiberglass Hatches Finished on both sides
    • NMMA Certified using ABYC Standards
    • Self Bailing cockpit
    • Forged Stainless Steel thru hulls with duckbill valves
    • Integrated swim platform with 3-step fold-out stainless swim ladder
    • Standard 6” Engine Jack Plate combined with notched transom allows our boats to leap on plane in shallow water with no propeller cavitation.  The notch provides so much water to the engine pickup that the engine can be run all the way up on the jack plate without fear of overheating the engine.
    • Marelon Seacocks (Composite material, no corrosion or electrolysis)
    • Anti-Venturi thru-hull fittings (Allows pumps to operate at speed)
    • Hidden deck drains with stainless covers and duckbill valves
    • Welded one piece stern eyes
    • Deep cockpit for a safe dry ride
    • Yacht Grip, non-skid deck
    • Setback transom provides full aft deck
    • Integrated swim platform with fold out ladder
    • Vertical rod holders on side of helm
    • Under gunwale rod storage for (2) 8′ rods each side
    • Forward rod lockers with room for (5) 7′-6″ rods on each side
    • 40″ wide flip up aft seat
    • Bow Dry storage
    • (2) removable 72 quart coolers
    • (6) Custom Crevalle pull-up cleats
    • (8) Stainless cup holders 6 are LED illuminated
    • Port and Starboard in-gunwale safety gear storage
    • 12″ Standard Multifunction display
    • Floor storage for 5 Gallon Bucket
    • Custom aluminum Leaning post with backrest, rigging tray, (4) rod holders, and (2) stainless cup holders, and storage bin
    • Unobstructed aft fishing deck
    • Pre wired 8 AWG wiring for trolling motor
    • Trolling motor plug panel with trim switch
    • Custom flat bar grab rails molded into the deck
    • Attwood 1100gph automatic/manual bilge pump
    • Fuel Water separator
    • Wet Sounds Speakers
    • Trim Tabs -Lenco with LED indicators

    Release Wells (2)
    • Insulated 28 Gallon aft release wells
    • Venturi aeration bubbler
    • Dual jets
    • Protected overflow stand pipe
    • Commercial Aquarium type aeration
    • Blue gel coat
    • Attwood 800 gph, dual port aeration pumps
    • LED lighting
    • Check valves on intake plumbing to prevent water level from dropping while at speed.

    Bait Well (1)
    • Adjustable aeration jet can be closed to convert bait well into fully insulated cooler
    • Wide opening allows easy access for cast nets
    • Side mounted overflow fitting with removable filter dome means no stand pipe to get in the way of netting bait
    • Blue gel coat
    • Sealed lid with double gasket prevents slosh at high speeds and during turns

    • Storm Cloud Grey gelcoat face to eliminate secondary glare
    • Simrad or Garmin 12” GPS Multifunction Display and glove box
    • Deluxe stainless steering wheel with power knob
    • Integrated, LED lit, dual height, nonskid foot rests
    • Welded 316 stainless steel console grab rail
    • Compass (except tower boats)
    • Dual Note Stainless Horn
    • Engine data on multifunction display (No gauges)
    • Portside helm door
    • Backlit switch lables
    • Dual illuminated stainless cup holders
    • Console door with trash bag holder
    • Individual circuit breakers
    • LED lighting inside storage and bilge
    • Fusion Bluetooth ready stereo
    • Integrated engine data on electronics options (when ordered)
    • Sea Star solutions hydraulic steering with tilt helm
    • Console Rod holders with hook/knife/plier holders (Non-Hard Top boats)
    • Helm panel with ring lit switches and backlit function labels

    Technical Standards


    • Tinned copper wiring with functions printed every 12″ on every wire
    • LED cockpit lighting throughout, blue or white selectable
    • Deutsch plugs on harnesses
    • Sealed Bussbars
    • Heat shrink electrical terminals
    • Circuit breakers (not fuses)
    • 8 AWG trolling motor harness
    • Remote trim switch at bow
    • No visible fasteners on panels
    • Helm mounted dual battery switch
    • LED Navigation lights
    • Deluxe battery hold down trays
  • Broker

    Broker: Chris Schollmeyer

    Email: Cschollmeyer@bondyachtsales.com

    Phone: 321-848-6030